Entrance Mats

Custom Commercial Entrance Mats

Perfect for most applications inside or out, Our entrance mats unique design makes it revolutionary. The rubber reinforced face nubs and waffle design provide crush proof scraping action. The raised rubber "water dam" border traps dirt and water – keeping them off carpet and floors.

Contains 20% Recycled Content

All our entrance logo mats are certified slip resistant by the National Floor Safety Institute.

Entrance Mats Product Information

    FEATURES

  1. Premium 24 oz/sq. anti-static Polypropylene fiber system dries quickly and won’t fade or rot. When wet, the rubber reinforce surface allows water to be wicked to the bottom of the mat away from foot traffic while providing a slip resistant surface.
  2. Polypropylene fiber system dries quickly and is suitable for indoor or outdoor use.
  3. Colorfast: Solution dyed for excellent light and we fastness.
  4. Unique ridged construction effectively stores dirt and moisture beneath shoe level.
  5. Exclusive “Water Dam” border keeps dirt and water in the amt and off the floor, minimizing slip hazards and floor damage.
  6. Green friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated types.
  7. Exclusive rubber reinforced face nubs prevent pile from crushing in high traffic areas, thereby maintaining high performance and extending product life.
  8. Should not be used in areas exposed to animal fats (kitchens) or petroleum products.
  9. Not adversely affected by salt or ice melt.
  10. Certified slip-resistant by the National Floor Safety Institute.
  11. Recommended uses computer rooms, around electronic equipment, malls, banks, hotels, offices, restaurants, healthcare, supermarkets and more.
  12. Anti-static
  13. Easy to clean: Just vacuum or hose off and hang to dry.
  14. Sizes: 18” x 27” 2’x 3’ 3’ x 4’ 3’ x 5’ 3’ x 8’ 3’ x 10’ 3’ x 12’ 3’ x 16’ 3’ x 20’ 4’ x 6’ 4’ x 8’ 4’ x 10’ 4’ x 12’ 4’ x 16’ 4’ x 20’ 6’ x 6’ 6’ x 8’ 6’ x 12’ 6’ x 16’ 6’ x 20’
  15. Lengths up to 60’ long

MAT THICKNESS
SURFACE
FIBER TYPE: Solution-dyed polypropylene, outstanding light fastness
WEIGHT: 24 oz. per square yard (884 grams per square meter)
NUB HEIGHT: 1/4"
DESIGN: Square "waffle"
BACKING
TYPE: 100% SBR Rubber (20% Recycled Content)
THICKNESS: .190" - Nubs
.050" - Between Nubs
.110" - Border
DUROMETER 60
TENSIL: 1400 PSI
TESTING
Passes Flammability Standard DOC-FF-1-70
ASTM C 1028-29 Static Coefficient of Friction. Dry .70


Aquamarine


Bluestone


Bordeaux


Charcoal


Dark Brown


Evergreen


Gold


Light Green


Medium Blue


Medium Brown


Medium Gray


Navy


Orange


Purple


Solid Red


White


Yellow


Red Black

Available Sizes:

18” x 27”

2’x 3’

3’ x 4’

3’ x 5’

3’ x 8’

3’ x 10’

3’ x 12’

3’ x 16’

3’ x 20’

4’ x 6’

4’ x 8’

4’ x 10’

4’ x 12’

4’ x 16’

4’ x 20’

6’ x 6’

6’ x 8’

6’ x 12’

6’ x 16’

6’ x 20’

MAINTENANCE RECOMMENDATIONS FOR LogoMatsPro

1. Vacuum Daily

When possible, Entrance mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner. In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service. Failure to rinse the solvent can result in damage to the rubber backing of the mat. Periodically, as needed, Entrance mats should be cleaned using a more vigorous method such as a pressure washer or water hose. Following the use of this method, the mats should be placed in a position to allow them to drain. This draining will occur rapidly and the mats will be ready to put back into service in a short time.

3. Deep Cleaning

Entrance mats may be cleaned by any routine method used for carpeted floors. This includes wet extraction as well as low moisture extraction methods. Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible. If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service.

4. Floor Preparation

Prior to the mat being put back into service, LogoMatsPro recommends that the floor where the mat will be placed be cleaned to remove dust and dirt. This will allow the mat to grip the floor more effectively reducing mat movement with traffic.

 

 

Ordering Information for Entrance Mats

Submit Your Information Request a Quote

or

Call Us 1-877-448-6299